Staufenbiel RED COUGAR, Instruction Manual

Page: 15 / 32

EN
15
Install the elevator and secure the screws with
threadlock.
4
Ad light pressure to the pushrod and bend them
towards the rudder and mark the position of the
rudderhorn. Use a 2mm drill for the holes and
remove the cover before you glue the servo-
horn with CA.
5
Connect the retainerclip on the pushrod and
bend them flush to the rudder horn.
Its important that the rudder is on neutral.
Cut the pushrod to aprobiate lenght.
6
Cut a small rectangle according the form of the
evelvator horn in the elevator and glue it with
epoxy.
Set the servo with the radio to neutral and cut
the pushrod to the aprobiate lengh and bend it.
7
Connect the ESC with the motor using gold
bullet connectors. Install the propeller and the
spinner.
Glue the hook and loop tape in the fuselage.
Connect the receiver according to the radio ma-
nual.
8