Staufenbiel RED COUGAR, Instruction Manual

Page: 19 / 32

EN
19
Use epoxy to glue the dowels in the wing.
The dowels should protrude 10mm out of the
wing.
21
Glue the center pin and wing joiner in one wing
that they cant get lost.
22
Start programming the model in the transmitter. Connect all servo cables according to the
transmitter manual and make sure that all servo and rudder are working in right direction. The
recommended control throws are shown in the table. You will get good flying performance with
these throws and the center of gravity shown below.
CONTROL THROWS
Flight Mode
Function Normal Brake
Aileron ▲ 12 mm, ▼8 mm ▲ 15 mm, dabei Höhenruder: ▼ 1 mm
Elevator ▲ 9 mm, ▼ 9 mm
Rudder ▲ 15 mm, ▼ 15 mm
CENTER OF GRAVITY
55 mm behind the leading edge against the fuselage.
Now enjoy the first flight with your new RED COUGAR. Look forward to many hours with your new
RED COUGAR.
THE END