Staufenbiel MINI HAWK III., Instruction Manual

Page: 22 / 40

22
EN
ARF VERSION ONLY:
Shift the servo in the compartment so that
when the servo horn is in a neutral position the
aileron is also in a perfectly neutral position. In
order to ensure that the compartment cover
will fit, the rod has to be perpendicular to the
aileron.
After adjusting the servo to the correct position,
fix it in place with a mounting clamp. Then
using a cannula, pour liquid superglue between
the servo and wing. As an alternative
adhesive you can also use a good resin, howe-
ver the servo adjustment would happen
after the application of the resin.
23
ARF VERSION ONLY:
Seal the compartment cover with UHU POR
(contact adhesive!). That way the cover can
be easily removed later.
24
Screw the wings to the fuselage with the M4
screw included.
25
The last step is to mark the model’s center of gravity on the bottom of the wing according to the
table and then shift the flight battery to the center of gravity corresponding with these specifications.
Provided that you comply with our center of gravity recommendation of 51mm, there is already a
laminated mark on the fuselage.