Staufenbiel MINI HAWK III., Instruction Manual

Page: 17 / 40

17
www.staufenbiel-shop.com
info@modellhobby.de
+49 40 30061950
EN
ARF VERSION ONLY:
For an easier assembly, remove both retaining
plates on the elevator servo with a milling cutter
or a cable cutter.
3
ARF VERSION ONLY:
Crop the servo horn according to the picture.
Expand the hole to 1.6mm using a drill. With
a servo tester, place the servo in a neutral posi-
tion and screw in the horn.
4
1,6 mm
ARF VERSION ONLY:
Then roughen the support surface in the fusela-
ge with a large piece of coarse sandpaper.
5
ARF VERSION ONLY:
Prepare a servo extension cable with a length
of 25cm and attach it to the servo. We
recommend that you use tape or a safety as a
safeguard.
6
ARF VERSION ONLY:
Prepare the linkage rod. Distance between the
fork-heads: 83mm. Secure the screw joints with
Loctite so that they will not loosen with time.
Important: Twist one of the fork-heads until it is
at a 90° angle to the other.
7