8
EN
CLEANING
For safe operation always keep the machine and its ventilation slots clean.
Regularly check to see if any dust or foreign matter has entered the ventilation slots and the
grills around the switches. Use a soft brush and/or air jet to remove any accumulated dust.
Wear safety glasses to protect your eyes whilst cleaning.
Exterior plastic parts may be cleaned with a damp cloth and mild detergent if necessary.
WARNING!
Never use alcohol, petrol or other cleaning agent. Never use caustic agents to
clean plastic parts. Water must never come into contact with the tool.
REPLACEMENT PARTS
To assure product safety and reliability, repairs, maintenance and adjustment (including
brush inspection and replacement) should be performed by authorised service centres
always using genuine replacement parts.
MAINTENANCE
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS
Model
PA150CE
Voltage
220-240 V~ 50 Hz
Input power
1200 W
No load speed
450-1700/min.
Backing pad Ø
150 and 180 mm
Weight
3,2 kg
А-weighted sound pressure level LpA
77.6 db(A), uncertainty 3 dB(A)
А-weighted sound power level LwA
88.6 dB(A), uncertainty 3 dB(A)
Vibration emission value ahb/ahm
5.99 m/s2, uncertainty 1,5 m/s2
Protection class
II
GENERAL INSPECTION
Regularly inspect all fasteners and ensure they are properly tightened. Should any of the
screws be loose, retighten it immediately to avoid hazards.
If the replacement of the supply cord is necessary, this has to be done by the manufacturer
or his agent in order to avoid a safety hazard.
MAINTENANCE
Summary of Contents for PA150CE
Page 2: ...2 PA150CE EN 5 3 4 6 1 7 2 ...
Page 40: ......
