STATUS SCIENTIFIC CONTROLS
FGD3 Infrared Gas Detector Heads
TD06/024
Issue:
7
Change Note:
1904
Page 21
5.2.9
C: 9 - View Engineer/Diagnostics Data
This feature is a
view-only
feature. No configuration changes are possible from within
this menu.
This information is for the use of Status Scientific Controls.
•
Select menu mode
C: 9
(refer to section 5.2) and press ENTER.
•
The display will alternate between the current value and code
C: 9x
: where x
is:
0
Sensor reading.
1
Zero Calibration temperature,
C.
2
Span Calibration Temperature
C.
3
Sensor temperature,
C.
4
Detector AtoD counts.
5
Reference AtoD counts.
6
Fractional absorbance.
•
The mode of operation can be selected by pressing the UP button.
•
Press MENU to return the instrument to its standard mode of operation.
5.2.10 C:10 - Sensor Frequency
This menu option is used by Status Scientific Controls personnel only and allows the
frequency at which the infrared sensor bulb is flashed. This setting must not be
changed from the factory set value without first contacting Status Scientific Controls.
Warning
Changing this value may limit the instruments performance and in extreme
cases, the instrument may no longer detect gas.
Summary of Contents for FGD 3 Series
Page 2: ......
