Status
Pro
–
T250 Instruction manual
7
GETTING STARTED
2.2 Assembly
To use the T250 with a tripod, fasten the Adapter (II) to the holes on the lower face of the
housing (V) using four of the screws delivered (IV). When delivered, the T250 will have
four screws on the front and the back facing.
The cylindrical face of the adapter has a 5/8“ thread for use with a tripod fitting.
To enable mounting on a vertical surface or for use with the Borealign kit, the Adapter (II)
can be fitted to the front or the rear facing, again using the supplied screws. The 5/8”
thread is continuous, so the laser beam has sight through the Adapter (II).
IV
IV
II
II
V
