Status Instruments DM4000U, Manual

Page: 65 / 94

Do not enter the CALIB submenu unless you know exactly what you are doing.
If the calibration settings are disturbed, it may be necessary to return the unit
to the factory.
The submenu may alter with the fitting of various output options, but is represented as
follows:
4.2.5.1 OFFSET ( Input offset adjustment )
This is a numeric value in engineering units which is added to the Process Variable
value in order to take out any system offset errors. This should be used with care as
there is no indication in the Process Variable display mode that this offset is being
applied and is thus capable of introducing an inadvertent error.
Default setting: 0.0
4.2.5.2 CAL 1 to CAL 10
(Input calibration)
These are used to calibrate the input system. Not recommended for users.
4.2.5.3 CLcUr1(3) Calibrate Current o/p board
CALIBRATION MENU
PROGRAMMING
Page 65