6
FO 0813
400mm
560mm
490
mm
400mm
700mm
0in.0mm
60m
m
0mm
M2
60
• Cut a hole in the worktop that corresponds with the above diagram.
• The edges of the hob must be a minimum distance of 60mm from the rear wall.
• 700mm between the highest point of the hob surface (including the burners) and the underside of
any horizontal surface directly above it.
• 400mm between the hob surfaces, providing that the underside of the horizontal surface is in line
with the outer edge of the hob.
• The underside of the horizontal surface must be at least 50mm away from the outer edges of the
hob.
• 50mm clearance around the appliance and between the hob surface and any combustible
materials.
• You must have a gap of a minimum of 25mm and a maximum of 74mm between the underneath
of the appliance and any surface that is below it.
45 mm