11
OPERATING INSTRUCTIONS
The appliance is fitted with a flame failure safety device on each burner, which is designed to stop
the flow of gas to the burner in the event of the flame going out.
• To light a burner, press in the relevant control knob and turn in an anticlockwise direction to the
maximum setting.
• Keep the Control Knob depressed, the automatic ignition for the burner will, automatically ignite
the flame.
• Keep the Control Knob depressed for a further 15 seconds after the flame has ignited.
• If the flame does not ignite or stay on, then repeat the process.
• The required setting can now be selected by turning the control knob.
• To switch the burner off, turn the Control Knob fully clockwise to the off position.
• In case of a power cut, the burners can be manually lit by using a match, although extreme care
should be taken.
Important: Once liquids start to boil, reduce the flame so a gentle boil is reached. This will help
prevent over spills.
Black Circle: Gas off
Large Flame: Maximum setting
Small Flame: Minimum setting