24
OPERATING INSTRUCTIONS
Starting a Cycle Wash
1. Ensure the water supply is switched on.
2. Insert the plug into the wall socket.
3. Pull out the lower and upper basket, load the dishes and push them back
into place. It is recommended to load the lower basket first, then the upper
one.
4. Pour in the detergent.
5. Close the door and press the Power button to switch on the machine.
6. Choose a program, the corresponding light will turn on. Then press the Start/
Pause button and the dishwasher will start its cycle.
Changing the Program Mid-Cycle
A wash cycle can only be changed if it has been running for a short time. If it
has been running for a while, the detergent may have already been released
and the dishwasher may have already drained the water. If this is the case, the
dishwasher needs to be reset and the detergent dispenser must be refilled. To
reset the dishwasher, follow the instructions below:
1. Press the Start/Pause button to pause the washing.
2. Press Program button for more than 3 seconds - the program will cancel.
3. Press the Program button to select the desired program.
4. Press the Start/Pause button, after 10 seconds, the dishwasher will start.
3 sec
