10
INSTALLATION
The dishwasher meets the requirements set out by the regulations in force
concerning safety and electrical equipment.
Warning: If the appliance must be moved at any time, keep it in an
upright position; if absolutely necessary, it may be tilted onto its back.
Any technical checks should be conducted exclusively by a trained and
authorised technician: Repairs carried out by unauthorised persons will
invalidate the guarantee, as well as posing a potential hazard to the user.
The manufacturer declines all responsibility for damage to persons or
property resulting from failure to observe the precautions, from tampering
with even a single component or from the use of non-original spare parts.
Disconnect electrical power before installing dishwasher. Failure to do so
could result in death or electrical shock.
The installation of the pipes and electrical equipment should only be done
by a qualified technician.
Positioning and Levelling
•
Position the dishwasher on a level sturdy floor. If the floor is uneven, the front
feet of the appliance may be adjusted until it reaches a horizontal position. If
the appliance is levelled correctly, it will be more stable and much less likely
to move or cause vibrations and noise while it is operating.
•
Place the dishwasher so that its sides or back panel are in contact with the
adjacent cabinets or the wall. This appliance can also be recessed under a
single worktop.
