24
Copyright © 2021 China Starwin
If the ACU has built-in modem, supporting the OpenAMIP, the related receiving signal
parameters values are automatically transferred to ACU from the modem.
NOTE: OpenAMIP is an ASCII-message based protocol that facilitates information
exchange between ACU and built-into it Modem.
Some modems support OpenAMIP, but some do not.
If the built-n modem doesn’t support OpenAMIP, the information exchange
between it and ACU is impossible. In such case ACU will not be able display any
modem related information.
Consult modem provider for details.
System Settings menu:
System Settings
menu items (Figure 6-7) are used for various operational parameters
definition, such as “
Satellite Setting
", "
Protection Function
", "
Modem Setting
" and
“
Factory Reset
”.
Figure 6-7 System Setting Configuration Display
Satellite Setting interface:
Satellite Setting
menu item allows selecting, editing, adding and deleting
satellites for system operation and store them in the list. Up to 99 satellites and
their related data can be stored in the list.
Navigate and select the required action via submenu items shown at Figure 6-8.
Figure 6-8:
Satellite Configuration Submenu Items
Satellite Selection
function is assigned for selection of existing record from the
list of available satellites to activate it for use by antenna system. To select a
record from the list, shown at Figure 6-9, move the highlighting to
Satellite
Selection
(Figure 6-8) by pressing ACU front panel “
Up”
or “
Down”
navigation
keys and press “
OK
” key for confirmation.
