19
www.starwincom.com
Tel: +8629-88664381, E-mail: [email protected]
7.
Other functions of LED display
(1)
LED state:
❖
OLED normal display, the LED flashing frequency is 1 second, two flashes at one time;
❖
OLED
Hibernation mode, the LED flashing frequency is 3 second, two flashes at one time;
❖
Press the touch any key, LED flash fast, when the OLED enter the Hibernation mode, can make the screen
light up.
(2)
Use of infrared keys:
a.
There are two infrared keys on the right side of OLED screen, which are arranged vertically. The upper key is
the main key to control the main interface, and the lower key is the sub key to control the sub interface.
b.
The switch between the main and sub interfaces is realized by press and hold the corresponding key, that is,
press and hold the main key can switch from the sub interface to the main interface, or switch in each sub
interface of the main interface, and press and hold the sub key can switch from the main interface to the sub
interface, or switch in each sub interface of the sub interface.
c.
The function of sub interface (such as BUC on/off) is realized by pressing the main and sub keys at the same
time.
Infrared Keys
Name
Sub Interface 1
Sub Interface 2
Upper Key
Main Key/Main Interface
Alignment Interface
Information Interface
Lower Key
Sub Key/Sub Interface
BUC Control Interface
Beam Switch Interface
Table 5-2 Key Function
(3)
Information Interface
Press and hold the sub key to enter the sub interface. If it is not in the information interface, continue to long press
the main key to switch to the information interface. The information interface contains battery power information,
as shown in Figure 5-23, version information 5-24, currently selected working mode 5-25, satellite parameter 5-26
and signal quality prompt 5-27.
Figure 5-23 Battery Information
Figure 5-24 Version Information
