6.
Now the LEDs of those number buttons light up where scenes have already been
assigned to. Press the desired number button
[1 – 20]
where the scene is to be stored.
Already occupied memory slots are overwritten without prompting. All LEDs will flash
three times briefly to indicate the successful saving. Also, the display confirms the saving
with
‘Store a scene succeed’
. Underneath appears the indication of the bank number and
the number of the newly programmed scene.
7.
Repeat steps 2-6 to programme additional scenes.
6.2.2
Programming a scene with movement
1.
Call up the programming mode.
2.
The LED of the
[FIXTURE]
button should light up now. Otherwise, press the
[FIXTURE]
button. Press the number buttons
[1 – 20]
to select one or multiple devices to be used to
create the scene.
Operating
DMX Invader 2420 MK2
69
Summary of Contents for DMX Invader 2420 MK2
