StarVedia Outdoor, Day&night IP Camera
36
3.16.
Set to factory default
For some reason, for example you forgot the web login password, you may want
to set the IP CAM to the factory default settings. The only thing you need to do is
pressing the “reset” button on the cable for more than 4 seconds and release it, do
this when the IP CAM is powered on. The IP CAM will reset to the factory default
settings and restart automatically.
The web login account will be “admin” (no password), the play-video password
will be “ipcam” after reset to factory default.
Figure 3-22: Press the reset button to set to the factory default
Summary of Contents for IC602
Page 5: ...StarVedia Outdoor Day night IP Camera 5 Table A 2 List of tested Wired NAT router devices...
Page 17: ...StarVedia Outdoor Day night IP Camera 17 Figure 3 6 Network settings page for fixed IP address...
Page 29: ...StarVedia Outdoor Day night IP Camera 29 Figure 3 14 Schedule management page...
Page 33: ...StarVedia Outdoor Day night IP Camera 33 Figure 3 18 Firmware upgrade status page...