StarTrac FREERUNNER 10-TRx, Owner'S Manual

Page: 20 / 36

Page 19
CONSOLE KEY FUNCTIONS
QUICK START Key
Enables manual operation using a default weight, SPEED and a default time limit.
NOTE: Default time and weight are adjustable through Maintenance Mode.
Fan Button
Cycles the fan between three settings: High, Low and Off
Numeric Keypad
Use to enter specific values for program parameters during program setup.
During a program, these keys may be used to change level.
Up/Down Buttons
Cycle between options during setup mode, adjust incline & speed up and down
during workout mode
BLUETOOTH DEVICE PAIRING
Bluetooth Device Pairing with Bluetooth Button:
Pushing the button puts the console into discover mode. The
console will be available for pairing for up to 60 seconds to pair with a compatible App. The button will flash
while searching for pairing, and the display will show the unique console code. Once a device is paired with the
console, the light will stop flashing and remain on to indicate the connection. Visit our website for a list of
compatible Apps.
Pairing with Apple Watch:
OpenHub consoles marked with this icon have the capability to connect
using Near Field Communication (NFC) with Apple Watch (must be running WatchOS 4.2 or later and
have option
Detect Gym Equipment
set to
On
in Watch settings for Workout App.) To connect, hold the Apple Watch near the
icon on the console (this is where the NFC reader is located). When the display and Apple Watch detect each other, the
Bluetooth button on the display will flash and then turn solid blue, and Apple Watch will ask user to confirm connection with
the display. Once connection is confirmed by user, it will finalize and data will begin to pass between console and Apple
Watch. It is possible to make this connection either before the workout begins (recommended), or at any time during an active
workout. At the end of workout, the connection will be terminated.
Note
: when Apple Watch is connected to display, the Calories display window will display Total Calories, and the scrolling data
window will display Active Calories periodically.