manualshive.com logo in svg

StarTech.com WAP1011BB, Instruction Manual

Share
Download
StarTech.com WAP1011BB Instruction Manual Download Page 4

2

Introduction

Thank you for purchasing a StarTech.com wireless access point (WAP). Based on the
IEEE 802.11b (2.4 GHz) wireless standard, this access point lets you connect your 802.11b
wireless devices to your wired Ethernet LAN or bridge wireless Infrastructure networks
together.  The WAP1011BB supports wireless access point roaming and bridging, and
uses 64/128-bit WEP encryption to keep your network transmissions secure. With auto-
rate fallback and web-based configuration control, you’ll be able to seamlessly and
securely integrate your wired and wireless networks.

Features

• Complies with 802.11b (2.4 GHz) specifications

• Supports auto-rate fallback and high data rates of 11/5.5/2/1 Mbits/sec

• Interoperable with other IEEE 802.11b compliant wireless devices

• Allows web-based configuration through Ethernet port

• Uses built-in DHCP server for auto IP address assignment

• Backed by StarTech.com’s two year warranty

Before You Begin

To ensure a quick and easy access point installation, please read through this section
carefully before attempting to install the access point.

System Requirements

• A desktop or laptop computer with an Ethernet port running Windows XP, 2000, 

Me, NT, 98, 95

• Other 802.11b (2.4 GHz) enabled devices

Package Contents

• 1 x WAP1011BB wireless access point

• 1 x 12V DC 0.5A power adapter

Summary of Contents for WAP1011BB

































Reviews:

No comments

Brands by name

Popular brands

Load more brands