Instruction manual
12
Set the FAT32 cluster size
1. Use the Power switch to turn on the duplicator and eraser.
2. Insert USB flash drives into the USB flash drive ports.
3. Highlight
Utility
and press the OK button.
4. Highlight
Do Format
and press the OK button.
5. Highlight
Set FAT32 Cluster Size
and press the OK button.
6. Highlight any of the following and press the OK button:
•
Auto
•
4KB
•
8KB
•
16KB
•
32KB
•
64KB
Erasing USB flash drives
The duplicator and eraser features three different types of erasing: quick erase, full
erase, and DoD erase.
Perform a quick erase
When you perform a quick erase, the entire contents of the USB flash drive are erased
and the USB flash drive is left unformatted. This type of erase process is the fastest.
Warning!
When you complete the following steps, all of the data on your USB flash
drive is deleted. If your USB flash drive has data on it that you require, you should
create a backup file or use a different USB flash drive.
1. Use the Power switch to turn on the duplicator and eraser.
2. Insert USB flash drives into any of the USB flash drive ports.
3. Highlight
Utility
and press the OK button.
4. Highlight
Quick Erase
and press the OK button.
5. When the confirmation message appears, press the OK button.
Tip!
To check the status of the erase process, use the UP and DOWN buttons to move
through the list of the USB flash drive ports.
