Instruction Manual
17
Control Command Format
If you would prefer to issue commands to the ST424HDBT using third party terminal
software please use the information below.
Note:
Operation support for third party software is not supported by StarTech.com
Com Port Settings
Baud Rate:
9600 bps
Data bits:
8 bits
Parity:
None
Stop bits:
1 bit
Flow control:
None
Outport1
<“57”
>“41”
1“09”
2“1D”
3“1F”
4“0D”
Outport2
< “1B”
> “11”
1 “17”
2 “12”
3 “59”
4 “08”
Outport3
< “55”
> “48”
1 “5E”
2 “06”
3 “05”
4 “03”
Outport4
< “07”
> “40”
1 “18”
2 “44”
3 “0F”
4 “51”
Control Code
Command Format
cir + ‘_’ + code + ‘ ’
“cir” is the key word, ‘_’ is Space, “Code” is the Control code , ‘ ’ is carriage return.
