Instruction Manual
4
4. Remove the cardboard inserts (if first time setup) and then insert the hard drives
into the slots. Hard drives can be removed from the enclosure by pressing down on
the handles, then pulling them out.
5. Once all of the hard drives are installed, reinstall the metal cage and front door.
Make sure the bottom of the cage stays inside of the track before closing the cover.
6. Connect the power adapter DIN connector into the side of the enclosure and power
up the enclosure.
Driver Installation
No driver installation is required for the supported operating systems, as this enclosure
is natively supported, so the drivers are already installed.
