Instruction Manual
23
Manual Setting
Date (Year/Month/Day)
-
Manually set the date for the system
(Ranges from 2011 to 2035).
Time
(Hour:Minute:Second)
-
Set the system time.
NTP Setting
Server IP / Domain Name 1
Empty
Enter the primary IP address or domain
name of NTP server (Max100 characters).
Server IP / Domain Name 2
Empty
Enter the secondary IP address or domain
name of NTP server (Max100 characters).
Update Time
24
Hours
Enter the frequency (hours) in which to
update the time.
Daylight Saving Time
Disable
Enables or disables Daylight Saving Time
(DST).
Month/
Day
Set the Daylight Saving Time (DST) start and
end times.
NAT (Network Address
Translation)
Enable
Enables or disables the Network Address
Translation function
IP Plug and Play (iPnP
Technology)
Enable
Enables or disables plug & play function.
When enabled, the user needn’t change
their network configuration to access the
Internet.
Session Limit
Enable,
100
Limits the number of sessions allowed per
user at one time, when enabled.
Layer 2 Isolation Security
Enable
If IP Plug and Play is enabled, you can enable
the Layer 2 Isolation Security function. When
Layer 2 Isolation Security is enabled, users
connected to the AP cannot communicate
with each other.
Guest Intranet Filtering
Disable
When enabled, you can specify up to 10 IP
addresses or ranges that Guest users cannot
visit.
Secure administrator IP
Addresses
Any
Specify up to 5 IP addresses or ranges to
allow remote administrative access from
only those specified
