StarTech.com PM1115U User Manual Download Page 19

Page: 19 / 120

2. Hardware Installation

1. Unpack the print server package and verify that all

the items listed in the section 1.2 are provided.

2. Connect the print server to the printer you want to

share on the network.

3. Connect the print server to your network by attached

the network cable to the UTP port of the print server.

4. Connect the power adapter to the print server. The

print server will perform the Power-On-Self-Test (POST)

after it is powered on. During the POST, the Status and

Ready LEDs will be on. When the LEDs are unlighted, the

print server is ready.

NOTE1: MUST use the power adapter shipped with the print

server, do NOT use any other power adapter from any
sources.

NOTE2: To prevent the compatibility problem between print

server and a few printer, it is recommended that you
power on the print server before the printer.

Summary of Contents for PM1115U

























































































































Search results

Summary of Contents for PM1115U

Reviews:

Related manuals for PM1115U

Brands by name

Popular brands

StarTech.com PM1115U, User Manual

Search results

Summary of Contents for PM1115U

Reviews:

Related manuals for PM1115U

Brands by name

Popular brands