21
1.
Route the
Cables
through the
Cable Management Slots
in
the
Columns
.
2.
Peel the plastic backing off the
Cable Clip Holders
and stick
them to the desired locations within the
VESA Mounting
Plate
.
(Figure 12)
Note:
Excess slack can be coiled and secured using two
Cable Clips
. (Figure 13)
3.
Thread the
Cable Clips
through the
Cable Clip Holders
.
4.
Secure the
Cables
with the
Cable Clips
and tighten.
5.
(Optional) Remove up to two
Panels
from the notch in each
Cable Cover
,
using a pair of
Needle-Nose Pliers
.
(Figure 14)
6.
Insert the
Cable Covers
into the
Cable Management Slots
in the
Columns
, routing the
Cables
through the notch in
each
Cable Cover
.
(Figure 15)
Attach the Rear Cover
Figure 16
Rear
Cover
M6 x
12 mm
Screws