22
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
1.
Place the
Rear Cover
over the
VESA Mounting Plate
and
Front Bracket Cover
. Align the holes in the top of the
Rear
Cover
with the holes in the top of the
VESA Mounting
Plate
. Align the holes in the bottom of the
Rear Cover
with
the holes in the bottom of the
Front Bracket Cover
.
(Figure 16)
2.
Insert four
M6 x 12 mm Screws
into the holes aligned in
step 1 and tighten, using an appropriately sized
Phillips
Head Screwdriver
.
Operation
Adjust the Tilt of the TV
1.
Remove the four
M6 x 12 mm Screws
installed in step 2 of
2.
Remove the
Rear Cover
.
3.
Remove the bottom two
M8 x 20 mm Screws,
that attach
the
VESA Mounting Plate
to the
Upper Columns
, using the
5 mm Hex Key
. (Figure 9)
4.
Loosen the top two
M8 x 20 mm Screws
,
that attach the
VESA Mounting Plate
to the
Upper Columns
,
a quarter
turn, using the
5 mm Hex Key
.
Note:
Do not over-loosen or remove the
M8 x 20 mm
Screws
.
5.
Tilt the
TV
to and aligning the lower holes in the
VESA
Mounting Plate
with the holes in the
Upper Columns
.
6.
Insert two
M8 x 20 mm Screws
through the holes in the
VESA Mounting Plate
and into the
Upper Columns
.
Tighten, using the
5 mm Hex Key
.
