1
Gateway 56-inch HD-Ready DLP TV
Lamp Replacement
You should replace the lamp in your DLP TV approximately every
6000 hours to maintain the best possible display image. Do not use a
lamp past the rated lamp life.
To replace the lamp:
1
Turn off your DLP TV.
2
Disconnect the power cord and all other external cables.
Warning
Carefully follow the procedure below. The high-pressure
lamp may explode if handled incorrectly.
Make sure that your DLP TV is turned off, power is
disconnected, and the lamp is completely cool
(minimum of 45 minutes) before replacing the lamp.
8510037.fm Page 1 Thursday, June 3, 2004 12:21 PM
