manualshive.com logo in svg

StarTech.com DuraView RACKCONS1708, User Manual

Share
Download
StarTech.com DuraView RACKCONS1708 User Manual Download Page 14

Instruction Manual

11

Input Source

1.  Press the 

Menu

 button.

2.  Use the 

Down

 and 

Up

 buttons to scroll.

3.  Press the 

Menu

 button to enter, and you will see: 

VGA/DVI

4.  Use the 

Down

 and 

Up

 buttons to select the input signal source.

5.  Press the 

Menu

 button to save your selection.

Brightness

1.  Press the 

Menu

 button.

2.  Use the 

Down

 and 

Up

 buttons to scroll to Brightness.

3.  Press the 

Menu

 button to enter.

4.  Use the 

Down

 and Up buttons to adjust the brightness of the display.

5.  Press the 

Menu

 button to save your selection.

Contrast

1.  Press the Menu button.
2.  Use the Down and Up buttons to scroll to Contrast.
3.  Press the Menu button to enter.
4.  Use the Down and Up buttons to adjust the contrast of the display.
5.  Press the Menu button to save your selection.

Color

1.  Press the Menu button.
2.  Use the Down and Up button to scroll.
3.  Highlight Color, and press the Menu button to enter.
4.  Use the Down and Up buttons to adjust the contrast of the display.
5.  Press the Menu button to save your selection.
6.  Please see chart on following page:

Summary of Contents for DuraView RACKCONS1708




























Reviews:

No comments

Brands by name

Popular brands

Load more brands