StarTech.com CB555WG, Instruction Manual

Page: 5 / 22

3
Installation
Note: Depending on your OS and the configuration of your system, the instructions
below may not be identical to what you see on your screen.
Note:
You must install the software BEFORE you plug the adapter into your notebook.
1. Insert your driver/utility disk into the disk drive and run the setup.exe file.
2. Click Next.
3. Review the License Agreement Select and select “I accept...”, then click Next.
4. On the “Ready to Install the Program” screen, click Install.
5. Windows will install the driver and utility of the card automatically. Click Finish to
complete the installation.
Note:
Windows XP users may see the Windows Logo Testing warning. This is normal.
This message is generated by any driver not written or tested by Microsoft. The driver
has not passed because it has never been tested by Microsoft. You can safely install this
driver on Windows XP.
6. When installation has been completed, insert the adapter into your notebook’s
cardbus slot.
7. The system will automatically detect the card as a new device and display the
“Found New Hardware Wizard” dialog box. Follow the installation wizard to
complete the device setup.