13
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Installing the DisplayLink Driver
If using the
USB-B Port
to connect the
Host Computer
to the
Docking Station
Module
, you will need to download and install the DisplayLink driver in order
for the
Host Computer
to properly function.
1. Using a web browser, navigate to
www.startech.com/MOD4DOCKACPD
.
2. On the Product page, click the
Support
tab located in the middle of the
screen.
3. In the
Drivers and Downloads
section, click on the driver link that
corresponds with the operating system running on the
Host Computer
(use
DisplayLink.exe for Windows).
4. Once the download is complete, extract the contents of the .zip file.
5. Click the appropriate driver for the version of operating system that you are
running and follow the on-screen prompts to complete the installation.
HDMI In Port (Pass Through)
The
HDMI In Port
is used for an HDMI pass through. Using this port will allow
the
Host Computer
to connect to a
Projector
or
Video Device
.
1. Connect an
HDMI Cable
(included) to the
HDMI In Port
on the top of the
Docking Station Module
.
2. Connect the other end of the
HDMI Cable
to an
HDMI Out Port
on your
Host Computer
.
Note:
The top
HDMI In Port
takes priority over the
HDMI In Port
on the
bottom on the
Docking Station Module
if both ports are being used.
USB-A Port
The
USB-A Port
can be used as a charging port (e.g. Cell Phone, Tablet, etc.) or
can be used to connect a USB storage device (e.g. Flash Drive) to display data/
files on the connected
Host Computer
or used with a
USB Peripheral Device
(Keyboard, Mouse, etc.).
