9
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
5. Mark the location of the
Mounting Holes
using a
Writing Utensil
. These
marks can be used as a guide to indicate where the
Mounting Screws
will
be installed in the surface.
6. Install the
Bracket Screws
(x4) through the
Mounting Bracket
and into
the mounting surface, using a
Phillips Head Screwdriver
. Be careful not to
overtighten.
Note:
To prevent the
Mounting Screws
from penetrating the opposite side
of the installation surface, be conscious of the size of the
Mounting Screw
compared to the depth of the surface.
Powering the Module
1. On the bottom of the
Docking Station Module
, connect the
Universal
Power Adapter
to the
DC 20V 6A Port
.
2. Tighten the
Lock Screw
on the
Universal Power Adapter
, to ensure
connectivity.
3. Connect the other end of the
Universal Power Adapter
into an appropriate
power source.
Note:
By default the
Power Button
on the
Docking Station Module
is set
to On. If the
LED Indicator
on the
Docking Station Module
does not light
up when connected to the
Universal Power Adapter
and power is present,
press the
Power Button
to turn on the
Docking Station Module
. The
LED
Indicator
will light up white.
Connecting Devices to the
Bottom of the Module
Audio Options
Speaker Out:
The
Speaker Out Port
is used to connect an
Audio Device
(e.g. Speakers) to the
Docking Station Module
for use with the connected
Host Computer
.
1. Connect a
3.5 mm Audio Cable
to the
Speaker Out Port
on the bottom of
the
Docking Station Module
.
