9
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Mounting Surfaces More Than 2.36 Inches Thick
For Mounting Surfaces with a thickness of more than 2.36
inches (60 mm) and less than 3.35 inches (85 mm), the Bottom
Plate must be flipped and installed upside-down.
1.
Remove the
Screws (x2)
, located at the bottom of the
Desk
Clamp
, using the
5 mm Hex Key
, and remove the
Bottom
Plate
. (Figure 7)
2.
Remove the
Screw
from the
Pressure Plate
, using a
Phillips
Head Screwdriver
. (Figure 8)
3.
Detach the
Pressure Plate
and
Washer
from the
Hand
Screw
.
Figure 7
Figure 8
Desk Clamp
Screw
Pressure Plate
Washer
Hand Screw
Bottom Plate
