6
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
5.
Remove the
Rubber Pad
, located at the base of the
Desk
Clamp
. (Figure 3)
6.
Remove the
Screws (x4)
, located at the base of the
Desk
Clamp
, using the
4mm Hex Key
, and remove the
Desk
Clamp
.
7.
Align the holes in the
Grommet Plate
with the holes in the
Pole Assembly
.
8.
Insert the
Screws (x4)
, removed in step 6, through the
Grommet Plate
and into the
Pole Assembly
and tighten,
using the
4 mm Hex Key
. (Figure 4)
9.
Affix the
Rubber Pad
to the
Grommet Plate
to complete
the
Grommet Mount Pole Assembly
.
10.
Position the
Grommet Mount Pole Assembly
over a
Grommet Hole
.
Figure 3
Figure 4
Rubber Pad
4 mm Hex
Key
