Instruction Manual
11
HDMI Over IP Receiver LED Behavior
Significance
Note:
For HDCP signals the Blue LED is replaced by a Purple LED
Flash red
Initiating power up
Flash green 3 times
Source connected, unlinked
Flash blue 1 time + flash green 2 times
LAN and Source connected, unlinked
Solid red
Source connected, linked
Solid blue + flash green 2 times
LAN connected, linked
Solid blue + flash blue 2 times
Source and LAN connected, linked
Solid blue + flash red 2 times
EDID copy error
Solid green
Source connected, linked
Solid blue + flash green 2 times
LAN connected, linked
Solid blue + flash blue 2 times
Source and LAN connected, linked
Push-Button Control
Unit
Function Button
HDMI Over IP Transmitter
and
HDMI Over IP Receiver
Press once to link or unlink the paired
Transmitter(s) and Receiver(s)
Press and hold for 3 seconds to enter standby
mode
Note:
Connect your EDID compliant display
to the HDMI Video Port on your HDMI Over IP
Transmitter and power on the display before
attempting this function
(Receiver only) Press and hold for 12 seconds for
EDID copy function
Press and hold for 24 seconds to restore factory
default settings
Infrared (IR) Blaster and Receiver Operation
Note:
IR signals require direct line of sight communication between remote controls
and receivers. Ensure your IR Remote Control is pointed directly at your IR Receiver.
Also ensure your IR Blaster is pointing directly towards your Source Device’s IR receiver.
Consult your Source Device’s user manual to find the exact location of the IR receiver.
