Instruction Manual
9
9. Use the M5 Allen key (9) to tighten the dual mount (2).
10. To attach monitors, do one of the following:
• If the VESA mount sits flush against the installation surface on the monitor,
insert the four M4x12 mm screws (5) through the mounting slots on the VESA
mount and into the mounting holes on the back of the monitor.
Use a Phillips screwdriver to tighten the screws.
• If the VESA mount doesn’t sit flush against the installation surface on the
monitor, you need to use the provided spacers. Insert the four M4x25 mm
screws (6) through the mounting slots on the VESA mount, into the four
spacers (4), and into the mounting holes on the back of the monitor.
Use a Phillips screwdriver to tighten the screws.
WARNING! To avoid damage to your display, do not overtighten the screws and stop
immediately if you encounter resistance. Ensure that all spacers and screws being used
are the same length and thread type.
