Instruction Manual
7
Attach the displays
1. Loosen the collar on the support post and adjust it to the desired height.
2. Attach each of the LCD arms (1) to the dual mount (2).
3. Use the M5 Allen key (
9
) to remove the M6 screws and washers from each of the
cover plate assemblies (
10
).
4. Place the remaining cover plate assemblies (10) onto each of the LCD arms (1).
5. Reinsert each set of the M6 screws and washers back into their cover plate
assemblies, in the same order you removed them, through the bottom of each of
the LCD arms (1).
6. Use the M5 Allen key (9) to tighten each of the cover plate assemblies.
