Instruction Manual
14
Touchpad Replacement
The built-on Touchpad offers “wheel mouse” functionality. The area of
the Touch Pad to the right side of the two small triangular marks is the
simulated “wheel” as shown below:
To remove the Touch Pad, press the tab underneath it upward to release
the latch, then slide it outwards until the Touch Pad can be lifted up clear
from the notches, as shown in the figure below (right side). The Touchpad
is attached by a piece of mini-USB cable. To install the Touchad, extend
just enough mini-USB cable and slide the Touch Pad all the way in till you
hear a click sound as it is locked in position.
Scroll
Wheel
Area
Triangular Marker
Left Mouse Button Right Mouse Button
Triangular Mark**
**Please note that the triangular mark must face outward