Quick-start guide
FR:
Guide de l’utilisateur - fr.startech.com
DE:
Bedienungsanleitung - de.startech.com
ES:
Guía del usuario - es.startech.com
NL:
Gebruiksaanwijzing - nl.startech.com
PT:
Guia do usuário - pt.startech.com
IT:
Guida per l’uso - it.startech.com
Manual Revision: 07/28/2017
For the latest information, technical specifications, and support for
this product, please visit www.StarTech.com/RKCONS1901.
Package contents
• 1 x rack console
• 12 x mounting rails
• 1 x KVM cable
• 8 x M5 cage nuts
• 8 x M5 screws
• 4 x regional power cords (NA/JP, UK, EU, ANZ)
• 1 x quick-start guide
Requirements
• 1U of rack space
• Grounding wire
• Power source
• Computer or server
• Phillips type screwdriver
Requirements are subject to change. For the latest requirements,
please visit
.
RKCONS1901
1-Port VGA Rackmount LCD Console - 19 in. - 1U
*actual product may vary from photos
Product diagram
Front view
1
Handle
2
Release switch
3
Display
4
Display menu buttons
5
6
7
Keyboard LEDs
8
Keyboard
9
Touchpad
Rail
Mounting bracket
(preinstalled)
1
2
3
4
5
6
7
8
9
Back view
1
Power adapter port
2
Power switch
3
Ground connection screw
4
Computer or server port
1
2
3
4
Install the console
Tip!
It’s easier to install the console if another person helps you with
the installation.
1. Based on the mounting depth in the server rack that you’re using,
select the appropriate length of mounting rails.
2. Decide where in the server rack you want to install the console
and insert the M5 cage nuts in that location.
3. Slide the console into the server rack so that the mounting
brackets are in front of the mounting holes in the server rack.
4. While another person holds the console in place, insert the M5
screws through the mounting brackets on the console and into
the M5 cage nuts.
5. Use a Phillips type screwdriver to tighten the M5 screws.
6. Slide one set of the mounting rails into the sides of the console.
7. Insert the M5 screws through the mounting brackets on the
mounting rails and into the M5 cage nuts.
8. Use a Phillips type screwdriver to tighten the M5 screws.
8
9
