19
Magnum Kiuas – Operating and installation instructions
25.05.2019
Starsauna Oy
Technical Support:
Pistotie 4
+358405455625 (from 8-16)
15860 Hollola, Finland
When the lower part of the sauna stove is piled with stones, install the securing bracket of the upper part in all Cenik models and
in all 10.5kW models with a high upper part. The external casing of the lower part of the sauna stove has pre-drilled holes for the
fastener, and it will be secured with one screw. The bracket will be positioned in line with the smaller hole of the intermediate
casing in the Lite/Cenik model, and at the fibre light in the Original model.
In the Lite and Cenik models, the casing must be
rotated already before the upper part has been installed in the right place.
The bracket will press the lower band of the upper
part downwards, and the upper part will not be able to move or rise upwards.
When piling stones in the sauna stove, always ensure that the resistors are straight.
Resistors that are turning outwards can be a
fire hazard. Resistors that are turning inwards can burn through prematurely.
If necessary, attach the sauna stove to the wall
with the supporting brackets included in the package. A sauna stove with too few stones is a fire hazard! Covering the sauna stove
is a fire hazard! The uppermost layer of the stones must be as tight as possible, the resistors must not be visible. We recommend
that the sauna stove stones are re-piled on a yearly basis! Always replace burned and cracked stones with new ones. If you use the
sauna every day, it is recommended that the stones are piled again every 3 mths. The use of ceramic stones other than (KERKES)
is forbidden. Other ceramic stones may cause the resistors to break down prematurely.