Starrett W2900, User Manual

Page: 7 / 118

PKG08863-UMW2900 7
GENERAL INFORMATION
1.2 Button Descriptions and Functions
The functions printed in yellow; LIMITS and PRESET, are used in conjunction with
the SHIFT/SET button also printed in yellow. To enable these functions press the
SHIFT/SET button first. The SET (S) icon will appear in the top left corner, and then
press the button for the required function.
1 SHIFT/SET
Dual function button used to enable the, Preset and the
Limits function. When enabled the SET (S) icon will be
displayed on the top left corner of the display.
2
Wireless
Button
Press and hold for 2 seconds to turn ON/OFF the Wireless
function. A quick push sends a reading over the wireless
network. See “Section 3 Wireless Overview, pg.9”.
3
MIN/MAX/
TIR
Displays the minimum or maximum values captured
during the movement of the spindle while in the min/
max limits operation. The TIR function displays the
difference of the two readings. See “Setting the Min/Max/
TIR” on page 8.
4 +/-
Plus/Minus sets the direction (polarity) of the reading
5 IN/MM
Toggles the display between English or Metric units.
6 LIMITS
Press the SHIFT/SET button then press the LIMITS button
to enable the function. Refer to the section, “Setting the
Limits” on page 6.
7 ON/OFF
Power button. Press and release to turn on, and Press and
hold for 3 seconds to turn off.
8 ZERO
Press and release the ZERO button and the display will
zero. The spindle must not be moved until the Zero
Sequence has elapsed. See “Zero Sequence” on page 3,
instruction #7.
9 ABS
Enables the ABS mode. Press and hold for 2 seconds to
activate the ABS mode, Press and hold for 2 seconds to
exit the ABS mode.
10 PRESET
Press the SHIFT/SET button then press the PRESET button
to enable the PRESET function. Refer to the section
“Setting PRESETS” on page 5.