Starrett W2900, User Manual

Page: 8 / 118

8 PKG08863-UMW2900
FUNCTIONS
2.0 Setting PRESET
This function is not available with the basic type indicators.
To set the value, follow the steps below:
1. The values can be set to: +/-99.9999 inches or +/- 9999.99 mm.
2. Press and hold the ZERO/ABS button for 2 seconds to activate the
ABS mode. The ABS icon will appear in the upper right corner of
the LCD Fig.3.
3. Press the SHIFT/SET followed by the PRESET button. The SET
and PRESET icons will appear in the upper left hand corner of the
LCD. The PRESET icon should be flashing Fig.4.
4. To move from the PRESET (P) icon to a digit place, Press the
SHIFT/SET button. The flashing digit indicates that the digit is
ready to be SET Fig.4. Press the PRESET button to increment the
digit value from 1-9. To set the digit and move to next digit, Press
the SHIFT/SET button.
5. To set a negative value Press the PRESET button when the plus/
minus sign icon is flashing. Fig.5.
6. Repeat steps 4 and 5 until all the digits are SET.
7. Use the SHIFT/SET button to cycle through the digits back to “P”
PRESET.
8. To exit the PRESET function, Press the PRESET button when the
PRESET icon is flashing. The SET value will remain displayed.
9. Press and hold the ZERO/ABS button to exit the Preset function.