Starrett 3754, User Manual

Page: 19 / 106

PKG08762-UM3754 19
ENGLISH
ACCESSORIES
PART NO. EDP NAME DESCRIPTION
3D FILE
PICTURE
PT22429 72441
Dovetail Body
Clamp 3/16" (4.8mm) diameter rod. For
use with surface gage snugs
PT11770A 71361 Tool Post Holder
1/4" x 1 5/6" (6.3 x 33mm)
post and 1/4" x 1/2" (6.3 x
12.7mm) shank
PT22428 72440
Swivel Post Snug
with Dovetail
Indicator Clamp
This snug will fit over spindles
and posts
3/32"-1/4" (2.4-6.3mm)
PT22430 72442 Snug and Rod Unit
This unit consists of a snug
(PT18724) and two 4"
(100mm) rods. One 1/4"
(6.3mm) diameter, the other a
3/8" (9.5mm) diameter.
PT27171 66457
Metric Snug and
Rod Unit
This unit consists of a snug
and two 4" (100mm) rods. One
.236" (6mm) diameter, the other
a .315" (8mm) diameter.
PT99454 68713
Indicator
Attachment
This dovetail clamp replaces
the standard scriber. See page
18 for a detailed de-scription
of the setup and use of this
attachment with your gage.
CAUTIONS ON USE
1. Do not store this instrument in areas of extreme temperature - below 10°F (-12°C)
or above 130°F (54°C).
2. For best results, operate the height gage in an area free from dust and sprays of
cutting oils, other coolants and liquids.
3. This is a precision instrument and extreme care should be taken to avoid bumping
or dropping the gage.
4. The height gage has been calibrated at 68°F (20°C). Avoid using the gage in
direct sunlight or in a draft of hot or cold air. For best results, use in a constant
temperature situation and allow time for the gage to soak at temperature for at
least one hour when transferring the tool from a temperature difference of more
than 10°F(6°C).
5. Clean the height gage vertical bar using a clean, lint-free cloth. Apply a very light coat of
lubricant. Use one or two drops of instrument oil on a finger and wipe over the vertical bar.
Move slide up and down and wipe off the excess oil.
6. Avoid any disassembly or modification of the gage, which will void all warranties.
7. Avoid using anything that might damage the buttons while pressing them.