3
KNIGHT
1.2 Charging your Battery
• Your Starmobile KNIGHT needs to be fully charged for first
use.
• Make sure the unit is turned off Plug one end of the charger
into the USB/charging port then plug the other end into a
standard AC power outlet.
• Once connected, the battery icon will repeatedly flash at the
top right corner of the screen. If the mobile phone is charging
while powered off, a battery indicator will also appear on the
screen. If the mobile phone has been depleted of battery life,
it will take awhile before a charging indicator appears on
screen after it has been plugged to a power source.
• When charging is complete, disconnect the charger from both
the electrical outlet and the mobile phone.
When the battery level icon has stopped flashing, this means that the
battery is fully charged. This process usually takes 3 hours. It is normal
for the mobile phone and charger to become warm during charging.
ATTENTION:
• Charging must be performed in a well-ventilated area with a
temperature between -10°C and +45°C.
• Use only the Starmobile-supplied battery and charger with your
Starmobile KNIGHT. Using accessories of other manufacturers or
vendors with your Starmobile KNIGHT may invalidate any approval
or warranty applicable to the device. It may result in non-operation
of the mobile phone or lost of information.
• If the mobile phone automatically shuts down or indicates that
“Battery is low”, it is advisable to charge your battery. If the battery
has not been entirely used up before recharging, the charging time
will automatically decrease.
1.3 Connecting to a Network
1.3.1 Inserting your SIM cards
Your Starmobile KNIGHT allows use of two separate SIM cards
at the same time (1 standard SIM and Micro SIM).
