Handbook for the TRIUS PRO-825C Issue 1 September 2020
4
Installing the USB system:
First, find a free USB socket on your PC and plug in the USB cable (do not connect
the camera at this time). If you do not have a USB2 capable computer, it is normally
possible to install a USB 2 card into an expansion slot.
The next operation is to run the software installer from the USB stick provided.
Insert the USB stick into the computer and wait for Windows Explorer to open with
the list of folders on the ROM. Now run the SETUP.EXE file that it contains – this will
initiate the self-install software which will guide you through the process of
installing the SX camera software onto your computer.
Now connect the USB cable to the socket on the camera rear panel.
Windows will report ‘Found new hardware’ and will ask for the location of the
drivers. Point the installer at the appropriate driver folder on your USB Stick (32 bit
or 64 bit) - note that the ‘Windows 8 signed drivers’ are OK for Windows 8, Windows
7 and Vista, but not for Windows XP. Use the older 32 or 64 bit drivers for XP
machines. Once you select the correct driver package, the driver installation should
proceed smoothly. (Ignore any warnings about the older drivers having not been
tested by Microsoft).
