STARLANE Oxydia, User Manual

Page: 9 / 16

9
Playback on TV (With optional HDMI cable)
1. Unscrew the rear cap, connect the camera and TV with
the HDMI cable provided.
2. Turn camera into standby, the video will output real time.
3. Press and hold Button
R
2 seconds until video file list
displays on TV, it is in playback mode now.
4. Select the file by Button
R
play or pause it by Button
O
.
5. During playing,
• Press Button
R
shorty, it will automatically jump to
the next file starts playing.
• Press and hold Button
R
2 seconds, the camera
will return Video file list.
6. In the video file list interface, press Button
R
2
seconds, the camera will return lo standby mode.
7. Then press and hold Button
O
approx 3 seconds, the
camera turns off.
Charging
1. Connect the camera to your PC/Iaptop/USB charger by
using the USB cable provided.
2. Once connected the red indicator on camera will turn
on then flash, the unit is charging now. (Also recording
while charging if you set AutoRecord=Y, please refer to
“ Other settings ”)
3. After around 3-4 hours when it stops flashing, it is full
charged.
4. Remove the camera.
Attention: 5 minutes after full charged, the camera
will turn off all indicators automatically if you do not
remove it.