STARLANE Oxydia, User Manual

Page: 7 / 16

7
Insert Memory card
1. Inserts your micro SD or micro SDHD card (not included in
package, a Class 4 micro SD Card will work just fine for this
unit but you can use class 4 and above) into the camera
with the card’s printed side up.
2. Gently push the card into the card slot until it locks in place.
3. To eject the card, gently push the card to release.
Record
1. Keep the micro SD card in card slot.
2. Select the video resolution you prefer on back panel, then
close rear cap.
3. Press and hold button
O
until vibrator shakes then
release and wait 2 seconds, two indicators turn on,
O
is
red,
R
is green. The camera now is in standby.
Attention: It will turn off automatically alter 5 minutes if
no further action is taken when standby.
4. Press button
R
shortly, the vibrator shakes then green
indicator flashes, the camera is now recording.
5. Press button
R
again, green indicator stops flashing and
vibrator shakes twice, camera stops recording and saves
video file automatically.
6. Press and hold button
O
in standby mode until vibrator
shakes, the camera turns off.
External MIC-In (With optional microphone)
1. Keep the micro SD card in card slot and turn on camera.
2. Unscrew rear cap, insert external microphone into camera.
3. Press MIC switch button on back panel (with D mark), MIC
Quick Guide