page 32 of 36
Every employer (user) is held responsible for the health
and safety of their employees. This also applies to service
personnel performing repair, maintenance or return.
The
health and safety clearance form
informs the con-
tractor about any possible contamination of the device and
forms the basis for the risk assessment.
In case of devices which have been in contact with
biological substances of risk level 2 contact the
STARLAB service BEFORE dispatching the device.
These devices have to be completely disassembled
and decontaminated by the user prior to shipment. Do
not return devices which have been in contact with bi-
ological substances of risk level 3 or 4.
These devices
cannot be checked, maintained or repaired and even de-
contaminated devices must not be returned to STARLAB
due to a residual risk.
The same conditions apply to on-site work.
No repair, maintenance or return is possible unless a
correctly completed health and safety clearance form
is returned. Devices sent without a completed form
will be rejected.
Send a completed copy of the
health
and safety clearance form to us in advance
. The dec-
laration must arrive before the equipment. Enclose a sec-
ond completed copy with the product.
Remove all components from the device that are not origi-
nal STARLAB components. STARLAB will not be respon-
sible for lost or damaged components that are not original
components.
Drain the device completely of fluids and residues.
Decontaminate the device.
Close all openings airtight
especially if using substances hazardous to health.
Repair - Maintenance - Return
IMPORTANT
Summary of Contents for N2400-9001
Page 1: ...page 1 of 36 Hand controller N2400 9001 Instructions for use...
Page 2: ...page 2 of 36...
Page 21: ...page 21 of 36...
Page 35: ...page 35 of 36...
