background image

Part Number: 3506 

 Page 4 

Version 1.2 

© 2012 Starkey Products, Inc.  

7.

 

You are done with the installation of the grille! Re-install bumper. It is very helpful to get 
assistance when re-aligning bumper with fenders. Be sure you re-attach all bolts and screws 
tightly. DO NOT re-install splash guard or radiator cover, this will be completed later.  

8.

 

Plug turn signals back into wiring on each side. Also re-attach temperature sensor – simply push 
the ribbed push pins into the new bracket molded into the lower grille.  

 
Final Installation: 

1.

 

Using the set of wiring extenders included in this kit, plug the end with the all black connector into 
your factory wiring you disconnected from the lower valance fog lights earlier.  

2.

 

Plug the other end of the wiring extenders into your new, LED fog lamps. The LED connectors are 
black, blue, and yellow. It is generally easier to plug them in from under the bumper.  

3.

 

Double check everything to make sure it was connected properly. Now insert the key and turn it to 
the “ON” position. Test the switch to make sure the lights turn ON and OFF. The fog lights are 
activated by pulling the knob outward. If the lights do not power on, visit the trouble shooting 
section below. Otherwise proceed to the next step.  

4.

 

Using the supplied zip ties, secure the wiring extenders. Be sure to keep wiring away from moving 
objects or sources of heat.  

5.

 

Adjust the lights. This will require a Philips screwdriver. Starkey Products adjusts the lamps from 
the factory but you may adjust them if you feel it is necessary. This is best done at night or in a 
garage where there is less light. Turn the lights on and position the car about 15 feet from the wall. 
On each fog light the screw can be turned left or right to adjust up and down. Adjust the lights so 
that the individual light patterns are level on the wall.  

6.

 

Re-install the radiator cover and splash guard. 

7.

 

Enjoy your new fog lights! The fog lights are activated by pulling the knob outward while the 
switch is in the running lamps, head lamps, or auto headlamps position. You may operate the fog 
lights as daytime running lights by turning them on while in the auto headlamps position. Your fog 
lights will turn off automatically when the key is removed from the vehicle. 

 

If you are still having trouble with your product, please contact us for technical assistance. Tech support is 
available via phone Monday through Friday 9am-5pm. Email tech support is available during regular 
business hours as well as weekends, holidays, and evenings. 
 

Starkey Products, Inc. 
Phone:

 (877)-332-8098 

Email:

 

[email protected]

 

Website:

 

www.Starkey-Products.com

 

 

Limited Warranty: 

This warranty covers defects in materials or workmanship in any component sold by Starkey Products, 
Inc. or its authorized dealers. Warranty is effective for five years from the date of purchase. Coverage 
terminates if you sell or transfer ownership of the product. Starkey Products will repair or replace the 
defective or malfunctioning product or any defective or malfunctioning part thereof at no charge. This 
warranty covers parts and labor only. This warranty does not cover any problem that is caused by abuse, 
misuse, acts of God, or improper installation. Any modification or alteration to any component will void 
the product warranty. Warranty does not cover wear that any components receive through the normal 
course of operation and use (including but not limited to bulbs). All warranty claims require proof of 
purchase. 

 

Summary of Contents for 3506

Page 1: ...with fog lights from the factory you will also need Starkey part number 3551 wiring and OEM switch kit to power your LED fog lamps Removing the bumper Removing the bumper is necessary Although it may sound daunting it is actually quite simple Driving the vehicle onto ramps or raising the front end of the car will greatly ease installation Before beginning the steps below turn off the car remove ke...

Page 2: ...l the edge of the bumper away from the fender as shown in picture 6 There are three clips that will dis engage when you begin to pull There will be a loud pop sound this is normal Repeat on opposite side of car 10 Slowly and very carefully begin to pull the bumper off The best place to hold the bumper is at the nose as you move backward If you encounter a lot of resistance check to make sure all h...

Page 3: ...he bumper The V6 Boss and GT grille are actually made up of three pieces grille grille surround chrome on V6 gloss black on Boss and GT and grille retainer The grille retainer will remain on the bumper and does not need to be removed We will be removing the actual grille and surround and replacing it with the GT grille surround 4 It is only necessary to unlock the 5 chrome tabs black on Boss on th...

Page 4: ... the car about 15 feet from the wall On each fog light the screw can be turned left or right to adjust up and down Adjust the lights so that the individual light patterns are level on the wall 6 Re install the radiator cover and splash guard 7 Enjoy your new fog lights The fog lights are activated by pulling the knob outward while the switch is in the running lamps head lamps or auto headlamps pos...

Reviews: