5
Safety instruction when working with bench grinders
Don’t allow abrasive disks to be exposed to beats and blows as well as be
smeared with oil.
Don’t work with the damaged or vibrating abrasive disks.
Don’t work with asbest-containing materials.
Check and adjust periodically the gap between working cradle 8 and protection cover
3.
Place the spark guard cover 2 as lower as possible while operating.
Don’t cut by the lateral sides of abrasive disks.
Don’t touch the revolving disks.
Don’t stop the revolving disc that keeps motion after the shutdown of machine.
Sparks appear during work with a metal. It is necessary to watch that sparks don’t
scatter on people. There must not be inflammable materials in the near area.
Change disks and make regulation works with the machine only when it is unplugged
from the mains power supply.
Safety Instruction
Attention! Observe the safety rules when using the machine to avoid
burning, electrical shock or other injuring.
1.
Make sure that the voltage of the power supply network as well as operation
conditions conforms to those described in this manual. Be especially prudent when
working in the zone of electric circuit wiring.
2.
Keep your working place in order – the mess brings about injuring.
3.
Don’t use the machine in places of increased humidity. Don’t work in raining
conditions. Keep the poisoning or pungent liquids and gases away of your working
space.
4.
Don’t touch grounded objects as water pipes, heaters etc. when working with the
machine.
5.
Don’t allow children and unauthorized person in your working zone.
6.
Don’t overload the machine. It reduces the life of machine and can lead to injures as
well.
7.
Use the machine only for its intended purpose.
8.
Don’t leave the machine working without care.
9.
Choose the proper clothes. Hide long hairs under the cap. Use rubber gloves and
protective shoes when working outside.
10.
Always use protective goggles while working. Use special protective mask if the dust
is generated abundantly.
