Maximum cutting capacity (mm)
Locking device
The electric tool is equipped with a locking device, which
allows to fix the head in a lower position. If you prefer to
release the head from a lower position, you can pull the
self-locking pin outwards (shown by figures aforesaid),
then turn the self-locking pin and place it into the shallow
groove nearby.
Contrarily, you can press the head downwards; when the
hole in the head casing is aligned with the self-locking pin,
you can pull and turn the self-locking pin, and then place
the self-locking pin into the groove nearby; if so, the head
will be locked in a lower position.
Carrying a tool
When carrying a tool, you can lock the head in a lower position;
if so, you can make the electric tool carry a tool conveniently.
* Note: make sure if the power cord is already removed or not.
On-bench installation Put the bolts into the installation
holes (one bolt for each hole) in the base, and then tighten the
bolts to fix the base on the stable and horizontal surface.
Install or remove saw blade
Self-locking
pin
Cross screwdriver
