Velocity parameters can be modified, according to the lifting mechanism with
power supply and any modification.
Circuit adopts the technology of the patch. There is not internal adjustment
device, full digital control technology to ensure that the product has high
reliability.
Operation simple, two groups of digital tube display setting arc voltage and the
arc pressure respectively, concise and straightforward. Setting parameters
operating in total of three knobs.
Interface simply and control convenient, it suitable for all plasma cutting
numerical control system, can also be used alone.
It adopts the proximity switch initial alignment method.
PWM output, speed adjustable of level 255, control of motor speedprecise,
several current setting, short circuit protection.
Cutting with the function of collision. When cut lips touch the steel plate, the
controller can quickly cut raise a certain distance, effective protection of
nozzle.
All input and output adopt photoelectric isolation, plasma voltage feedback
using linear photoelectric isolated, independent power supply, can very good
compatibility with the partial pressure of various brands of imported plasma
power supply.
It is integration starting arc successful judgment function, and arc successful
feedback function.
2.2 Main technical indicators
Power supply requirements: DC24V + / - 10% 3A
Suitable motor: 24V with DC motor
Drive mode: PWM
Output current: < power input current
Initial alignment method: proximity switch (normally open normally closed
through the jumper cap set)
